You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

525 lines
23 KiB

/** @file
EFI FTPv4 (File Transfer Protocol version 4) Protocol Definition
The EFI FTPv4 Protocol is used to locate communication devices that are
supported by an EFI FTPv4 Protocol driver and to create and destroy instances
of the EFI FTPv4 Protocol child protocol driver that can use the underlying
communication device.
The definitions in this file are defined in UEFI Specification 2.3, which have
not been verified by one implementation yet.
Copyright (c) 2009 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
@par Revision Reference:
This Protocol is introduced in UEFI Specification 2.2
**/
#ifndef __EFI_FTP4_PROTOCOL_H__
#define __EFI_FTP4_PROTOCOL_H__
#define EFI_FTP4_SERVICE_BINDING_PROTOCOL_GUID \
{ \
0xfaaecb1, 0x226e, 0x4782, {0xaa, 0xce, 0x7d, 0xb9, 0xbc, 0xbf, 0x4d, 0xaf } \
}
#define EFI_FTP4_PROTOCOL_GUID \
{ \
0xeb338826, 0x681b, 0x4295, {0xb3, 0x56, 0x2b, 0x36, 0x4c, 0x75, 0x7b, 0x9 } \
}
typedef struct _EFI_FTP4_PROTOCOL EFI_FTP4_PROTOCOL;
///
/// EFI_FTP4_CONNECTION_TOKEN
///
typedef struct {
///
/// The Event to signal after the connection is established and Status field is updated
/// by the EFI FTP v4 Protocol driver. The type of Event must be
/// EVENT_NOTIFY_SIGNAL, and its Task Priority Level (TPL) must be lower than or
/// equal to TPL_CALLBACK. If it is set to NULL, this function will not return until the
/// function completes.
///
EFI_EVENT Event;
///
/// The variable to receive the result of the completed operation.
/// EFI_SUCCESS: The FTP connection is established successfully
/// EFI_ACCESS_DENIED: The FTP server denied the access the user's request to access it.
/// EFI_CONNECTION_RESET: The connect fails because the connection is reset either by instance
/// itself or communication peer.
/// EFI_TIMEOUT: The connection establishment timer expired and no more specific
/// information is available.
/// EFI_NETWORK_UNREACHABLE: The active open fails because an ICMP network unreachable error is
/// received.
/// EFI_HOST_UNREACHABLE: The active open fails because an ICMP host unreachable error is
/// received.
/// EFI_PROTOCOL_UNREACHABLE: The active open fails because an ICMP protocol unreachable error is
/// received.
/// EFI_PORT_UNREACHABLE: The connection establishment timer times out and an ICMP port
/// unreachable error is received.
/// EFI_ICMP_ERROR: The connection establishment timer timeout and some other ICMP
/// error is received.
/// EFI_DEVICE_ERROR: An unexpected system or network error occurred.
///
EFI_STATUS Status;
} EFI_FTP4_CONNECTION_TOKEN;
///
/// EFI_FTP4_CONFIG_DATA
///
typedef struct {
///
/// Pointer to a ASCII string that contains user name. The caller is
/// responsible for freeing Username after GetModeData() is called.
///
UINT8 *Username;
///
/// Pointer to a ASCII string that contains password. The caller is
/// responsible for freeing Password after GetModeData() is called.
///
UINT8 *Password;
///
/// Set it to TRUE to initiate an active data connection. Set it to
/// FALSE to initiate a passive data connection.
///
BOOLEAN Active;
///
/// Boolean value indicating if default network settting used.
///
BOOLEAN UseDefaultSetting;
///
/// IP address of station if UseDefaultSetting is FALSE.
///
EFI_IPv4_ADDRESS StationIp;
///
/// Subnet mask of station if UseDefaultSetting is FALSE.
///
EFI_IPv4_ADDRESS SubnetMask;
///
/// IP address of gateway if UseDefaultSetting is FALSE.
///
EFI_IPv4_ADDRESS GatewayIp;
///
/// IP address of FTPv4 server.
///
EFI_IPv4_ADDRESS ServerIp;
///
/// FTPv4 server port number of control connection, and the default
/// value is 21 as convention.
///
UINT16 ServerPort;
///
/// FTPv4 server port number of data connection. If it is zero, use
/// (ServerPort - 1) by convention.
///
UINT16 AltDataPort;
///
/// A byte indicate the representation type. The right 4 bit is used for
/// first parameter, the left 4 bit is use for second parameter
/// - For the first parameter, 0x0 = image, 0x1 = EBCDIC, 0x2 = ASCII, 0x3 = local
/// - For the second parameter, 0x0 = Non-print, 0x1 = Telnet format effectors, 0x2 =
/// Carriage Control.
/// - If it is a local type, the second parameter is the local byte byte size.
/// - If it is a image type, the second parameter is undefined.
///
UINT8 RepType;
///
/// Defines the file structure in FTP used. 0x00 = file, 0x01 = record, 0x02 = page.
///
UINT8 FileStruct;
///
/// Defines the transifer mode used in FTP. 0x00 = stream, 0x01 = Block, 0x02 = Compressed.
///
UINT8 TransMode;
} EFI_FTP4_CONFIG_DATA;
typedef struct _EFI_FTP4_COMMAND_TOKEN EFI_FTP4_COMMAND_TOKEN;
/**
Callback function when process inbound or outbound data.
If it is receiving function that leads to inbound data, the callback function
is called when data buffer is full. Then, old data in the data buffer should be
flushed and new data is stored from the beginning of data buffer.
If it is a transmit function that lead to outbound data and the size of
Data in daata buffer has been transmitted, this callback function is called to
supply additional data to be transmitted.
@param[in] This Pointer to the EFI_FTP4_PROTOCOL instance.
@param[in] Token Pointer to the token structure to provide the parameters that
are used in this operation.
@return User defined Status.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_FTP4_DATA_CALLBACK)(
IN EFI_FTP4_PROTOCOL *This,
IN EFI_FTP4_COMMAND_TOKEN *Token
);
///
/// EFI_FTP4_COMMAND_TOKEN
///
struct _EFI_FTP4_COMMAND_TOKEN {
///
/// The Event to signal after request is finished and Status field
/// is updated by the EFI FTP v4 Protocol driver. The type of Event
/// must be EVT_NOTIFY_SIGNAL, and its Task Priority Level
/// (TPL) must be lower than or equal to TPL_CALLBACK. If it is
/// set to NULL, related function must wait until the function
/// completes.
///
EFI_EVENT Event;
///
/// Pointer to a null-terminated ASCII name string.
///
UINT8 *Pathname;
///
/// The size of data buffer in bytes.
///
UINT64 DataBufferSize;
///
/// Pointer to the data buffer. Data downloaded from FTP server
/// through connection is downloaded here.
///
VOID *DataBuffer;
///
/// Pointer to a callback function. If it is receiving function that leads
/// to inbound data, the callback function is called when databuffer is
/// full. Then, old data in the data buffer should be flushed and new
/// data is stored from the beginning of data buffer. If it is a transmit
/// function that lead to outbound data and DataBufferSize of
/// Data in DataBuffer has been transmitted, this callback
/// function is called to supply additional data to be transmitted. The
/// size of additional data to be transmitted is indicated in
/// DataBufferSize, again. If there is no data remained,
/// DataBufferSize should be set to 0.
///
EFI_FTP4_DATA_CALLBACK DataCallback;
///
/// Pointer to the parameter for DataCallback.
///
VOID *Context;
///
/// The variable to receive the result of the completed operation.
/// EFI_SUCCESS: The FTP command is completed successfully.
/// EFI_ACCESS_DENIED: The FTP server denied the access to the requested file.
/// EFI_CONNECTION_RESET: The connect fails because the connection is reset either
/// by instance itself or communication peer.
/// EFI_TIMEOUT: The connection establishment timer expired and no more
/// specific information is available.
/// EFI_NETWORK_UNREACHABLE: The active open fails because an ICMP network unreachable
/// error is received.
/// EFI_HOST_UNREACHABLE: The active open fails because an ICMP host unreachable
/// error is received.
/// EFI_PROTOCOL_UNREACHABLE: The active open fails because an ICMP protocol unreachable
/// error is received.
/// EFI_PORT_UNREACHABLE: The connection establishment timer times out and an ICMP port
/// unreachable error is received.
/// EFI_ICMP_ERROR: The connection establishment timer timeout and some other ICMP
/// error is received.
/// EFI_DEVICE_ERROR: An unexpected system or network error occurred.
///
EFI_STATUS Status;
};
/**
Gets the current operational settings.
The GetModeData() function reads the current operational settings of this
EFI FTPv4 Protocol driver instance. EFI_FTP4_CONFIG_DATA is defined in the
EFI_FTP4_PROTOCOL.Configure.
@param[in] This Pointer to the EFI_FTP4_PROTOCOL instance.
@param[out] ModeData Pointer to storage for the EFI FTPv4 Protocol driver
mode data. The string buffers for Username and Password
in EFI_FTP4_CONFIG_DATA are allocated by the function,
and the caller should take the responsibility to free the
buffer later.
@retval EFI_SUCCESS This function is called successfully.
@retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
- This is NULL.
- ModeData is NULL.
@retval EFI_NOT_STARTED The EFI FTPv4 Protocol driver has not been started
@retval EFI_OUT_OF_RESOURCES Could not allocate enough resource to finish the operation.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_FTP4_GET_MODE_DATA)(
IN EFI_FTP4_PROTOCOL *This,
OUT EFI_FTP4_CONFIG_DATA *ModeData
);
/**
Disconnecting a FTP connection gracefully.
The Connect() function will initiate a connection request to the remote FTP server
with the corresponding connection token. If this function returns EFI_SUCCESS, the
connection sequence is initiated successfully. If the connection succeeds or faild
due to any error, the Token->Event will be signaled and Token->Status will be updated
accordingly.
@param[in] This Pointer to the EFI_FTP4_PROTOCOL instance.
@param[in] Token Pointer to the token used to establish control connection.
@retval EFI_SUCCESS The connection sequence is successfully initiated.
@retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
- This is NULL.
- Token is NULL.
- Token->Event is NULL.
@retval EFI_NOT_STARTED The EFI FTPv4 Protocol driver has not been started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_OUT_OF_RESOURCES Could not allocate enough resource to finish the operation.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_FTP4_CONNECT)(
IN EFI_FTP4_PROTOCOL *This,
IN EFI_FTP4_CONNECTION_TOKEN *Token
);
/**
Disconnecting a FTP connection gracefully.
The Close() function will initiate a close request to the remote FTP server with the
corresponding connection token. If this function returns EFI_SUCCESS, the control
connection with the remote FTP server is closed.
@param[in] This Pointer to the EFI_FTP4_PROTOCOL instance.
@param[in] Token Pointer to the token used to close control connection.
@retval EFI_SUCCESS The close request is successfully initiated.
@retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
- This is NULL.
- Token is NULL.
- Token->Event is NULL.
@retval EFI_NOT_STARTED The EFI FTPv4 Protocol driver has not been started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_OUT_OF_RESOURCES Could not allocate enough resource to finish the operation.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_FTP4_CLOSE)(
IN EFI_FTP4_PROTOCOL *This,
IN EFI_FTP4_CONNECTION_TOKEN *Token
);
/**
Sets or clears the operational parameters for the FTP child driver.
The Configure() function will configure the connected FTP session with the
configuration setting specified in FtpConfigData. The configuration data can
be reset by calling Configure() with FtpConfigData set to NULL.
@param[in] This Pointer to the EFI_FTP4_PROTOCOL instance.
@param[in] FtpConfigData Pointer to configuration data that will be assigned to
the FTP child driver instance. If NULL, the FTP child
driver instance is reset to startup defaults and all
pending transmit and receive requests are flushed.
@retval EFI_SUCCESS The FTPv4 driver was configured successfully.
@retval EFI_INVALID_PARAMETER One or more following conditions are TRUE:
- This is NULL.
- FtpConfigData.RepType is invalid.
- FtpConfigData.FileStruct is invalid.
- FtpConfigData.TransMode is invalid.
- IP address in FtpConfigData is invalid.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_UNSUPPORTED One or more of the configuration parameters are not supported
by this implementation.
@retval EFI_OUT_OF_RESOURCES The EFI FTPv4 Protocol driver instance data could not be
allocated.
@retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI FTPv4
Protocol driver instance is not configured.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_FTP4_CONFIGURE)(
IN EFI_FTP4_PROTOCOL *This,
IN EFI_FTP4_CONFIG_DATA *FtpConfigData OPTIONAL
);
/**
Downloads a file from an FTPv4 server.
The ReadFile() function is used to initialize and start an FTPv4 download process
and optionally wait for completion. When the download operation completes, whether
successfully or not, the Token.Status field is updated by the EFI FTPv4 Protocol
driver and then Token.Event is signaled (if it is not NULL).
Data will be downloaded from the FTPv4 server into Token.DataBuffer. If the file size
is larger than Token.DataBufferSize, Token.DataCallback will be called to allow for
processing data and then new data will be placed at the beginning of Token.DataBuffer.
@param[in] This Pointer to the EFI_FTP4_PROTOCOL instance.
@param[in] Token Pointer to the token structure to provide the parameters that
are used in this operation.
@retval EFI_SUCCESS The data file is being downloaded successfully.
@retval EFI_INVALID_PARAMETER One or more of the parameters is not valid.
- This is NULL.
- Token is NULL.
- Token.Pathname is NULL.
- Token. DataBuffer is NULL.
- Token. DataBufferSize is 0.
@retval EFI_NOT_STARTED The EFI FTPv4 Protocol driver has not been started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
@retval EFI_DEVICE_ERROR An unexpected network error or system error occurred.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_FTP4_READ_FILE)(
IN EFI_FTP4_PROTOCOL *This,
IN EFI_FTP4_COMMAND_TOKEN *Token
);
/**
Uploads a file from an FTPv4 server.
The WriteFile() function is used to initialize and start an FTPv4 upload process and
optionally wait for completion. When the upload operation completes, whether successfully
or not, the Token.Status field is updated by the EFI FTPv4 Protocol driver and then
Token.Event is signaled (if it is not NULL). Data to be uploaded to server is stored
into Token.DataBuffer. Token.DataBufferSize is the number bytes to be transferred.
If the file size is larger than Token.DataBufferSize, Token.DataCallback will be called
to allow for processing data and then new data will be placed at the beginning of
Token.DataBuffer. Token.DataBufferSize is updated to reflect the actual number of bytes
to be transferred. Token.DataBufferSize is set to 0 by the call back to indicate the
completion of data transfer.
@param[in] This Pointer to the EFI_FTP4_PROTOCOL instance.
@param[in] Token Pointer to the token structure to provide the parameters that
are used in this operation.
@retval EFI_SUCCESS TThe data file is being uploaded successfully.
@retval EFI_UNSUPPORTED The operation is not supported by this implementation.
@retval EFI_INVALID_PARAMETER One or more of the parameters is not valid.
- This is NULL.
- Token is NULL.
- Token.Pathname is NULL.
- Token. DataBuffer is NULL.
- Token. DataBufferSize is 0.
@retval EFI_NOT_STARTED The EFI FTPv4 Protocol driver has not been started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
@retval EFI_DEVICE_ERROR An unexpected network error or system error occurred.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_FTP4_WRITE_FILE)(
IN EFI_FTP4_PROTOCOL *This,
IN EFI_FTP4_COMMAND_TOKEN *Token
);
/**
Download a data file "directory" from a FTPv4 server. May be unsupported in some EFI
implementations.
The ReadDirectory() function is used to return a list of files on the FTPv4 server that
logically (or operationally) related to Token.Pathname, and optionally wait for completion.
When the download operation completes, whether successfully or not, the Token.Status field
is updated by the EFI FTPv4 Protocol driver and then Token.Event is signaled (if it is not
NULL). Data will be downloaded from the FTPv4 server into Token.DataBuffer. If the file size
is larger than Token.DataBufferSize, Token.DataCallback will be called to allow for processing
data and then new data will be placed at the beginning of Token.DataBuffer.
@param[in] This Pointer to the EFI_FTP4_PROTOCOL instance.
@param[in] Token Pointer to the token structure to provide the parameters that
are used in this operation.
@retval EFI_SUCCESS The file list information is being downloaded successfully.
@retval EFI_UNSUPPORTED The operation is not supported by this implementation.
@retval EFI_INVALID_PARAMETER One or more of the parameters is not valid.
- This is NULL.
- Token is NULL.
- Token. DataBuffer is NULL.
- Token. DataBufferSize is 0.
@retval EFI_NOT_STARTED The EFI FTPv4 Protocol driver has not been started.
@retval EFI_NO_MAPPING When using a default address, configuration (DHCP, BOOTP,
RARP, etc.) is not finished yet.
@retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.
@retval EFI_DEVICE_ERROR An unexpected network error or system error occurred.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_FTP4_READ_DIRECTORY)(
IN EFI_FTP4_PROTOCOL *This,
IN EFI_FTP4_COMMAND_TOKEN *Token
);
/**
Polls for incoming data packets and processes outgoing data packets.
The Poll() function can be used by network drivers and applications to increase the
rate that data packets are moved between the communications device and the transmit
and receive queues. In some systems, the periodic timer event in the managed network
driver may not poll the underlying communications device fast enough to transmit
and/or receive all data packets without missing incoming packets or dropping outgoing
packets. Drivers and applications that are experiencing packet loss should try calling
the Poll() function more often.
@param[in] This Pointer to the EFI_FTP4_PROTOCOL instance.
@retval EFI_SUCCESS Incoming or outgoing data was processed.
@retval EFI_NOT_STARTED This EFI FTPv4 Protocol instance has not been started.
@retval EFI_INVALID_PARAMETER This is NULL.
@retval EFI_DEVICE_ERROR EapAuthType An unexpected system or network error occurred.
@retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue.
Consider increasing the polling rate.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_FTP4_POLL)(
IN EFI_FTP4_PROTOCOL *This
);
///
/// EFI_FTP4_PROTOCOL
/// provides basic services for client-side FTP (File Transfer Protocol)
/// operations.
///
struct _EFI_FTP4_PROTOCOL {
EFI_FTP4_GET_MODE_DATA GetModeData;
EFI_FTP4_CONNECT Connect;
EFI_FTP4_CLOSE Close;
EFI_FTP4_CONFIGURE Configure;
EFI_FTP4_READ_FILE ReadFile;
EFI_FTP4_WRITE_FILE WriteFile;
EFI_FTP4_READ_DIRECTORY ReadDirectory;
EFI_FTP4_POLL Poll;
};
extern EFI_GUID gEfiFtp4ServiceBindingProtocolGuid;
extern EFI_GUID gEfiFtp4ProtocolGuid;
#endif