You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

265 lines
11 KiB

4 years ago
/** @file
The EFI_SD_MMC_PASS_THRU_PROTOCOL provides the ability to send SD/MMC Commands
to any SD/MMC device attached to the SD compatible pci host controller.
Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef __SD_MMC_PASS_THRU_H__
#define __SD_MMC_PASS_THRU_H__
#define EFI_SD_MMC_PASS_THRU_PROTOCOL_GUID \
{ \
0x716ef0d9, 0xff83, 0x4f69, {0x81, 0xe9, 0x51, 0x8b, 0xd3, 0x9a, 0x8e, 0x70 } \
}
typedef struct _EFI_SD_MMC_PASS_THRU_PROTOCOL EFI_SD_MMC_PASS_THRU_PROTOCOL;
typedef enum {
SdMmcCommandTypeBc, // Broadcast commands, no response
SdMmcCommandTypeBcr, // Broadcast commands with response
SdMmcCommandTypeAc, // Addressed(point-to-point) commands
SdMmcCommandTypeAdtc // Addressed(point-to-point) data transfer commands
} EFI_SD_MMC_COMMAND_TYPE;
typedef enum {
SdMmcResponseTypeR1,
SdMmcResponseTypeR1b,
SdMmcResponseTypeR2,
SdMmcResponseTypeR3,
SdMmcResponseTypeR4,
SdMmcResponseTypeR5,
SdMmcResponseTypeR5b,
SdMmcResponseTypeR6,
SdMmcResponseTypeR7
} EFI_SD_MMC_RESPONSE_TYPE;
typedef struct _EFI_SD_MMC_COMMAND_BLOCK {
UINT16 CommandIndex;
UINT32 CommandArgument;
UINT32 CommandType; // One of the EFI_SD_MMC_COMMAND_TYPE values
UINT32 ResponseType; // One of the EFI_SD_MMC_RESPONSE_TYPE values
} EFI_SD_MMC_COMMAND_BLOCK;
typedef struct _EFI_SD_MMC_STATUS_BLOCK {
UINT32 Resp0;
UINT32 Resp1;
UINT32 Resp2;
UINT32 Resp3;
} EFI_SD_MMC_STATUS_BLOCK;
typedef struct _EFI_SD_MMC_PASS_THRU_COMMAND_PACKET {
UINT64 Timeout;
EFI_SD_MMC_COMMAND_BLOCK *SdMmcCmdBlk;
EFI_SD_MMC_STATUS_BLOCK *SdMmcStatusBlk;
VOID *InDataBuffer;
VOID *OutDataBuffer;
UINT32 InTransferLength;
UINT32 OutTransferLength;
EFI_STATUS TransactionStatus;
} EFI_SD_MMC_PASS_THRU_COMMAND_PACKET;
/**
Sends SD command to an SD card that is attached to the SD controller.
The PassThru() function sends the SD command specified by Packet to the SD card
specified by Slot.
If Packet is successfully sent to the SD card, then EFI_SUCCESS is returned.
If a device error occurs while sending the Packet, then EFI_DEVICE_ERROR is returned.
If Slot is not in a valid range for the SD controller, then EFI_INVALID_PARAMETER
is returned.
If Packet defines a data command but both InDataBuffer and OutDataBuffer are NULL,
EFI_INVALID_PARAMETER is returned.
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
@param[in] Slot The slot number of the SD card to send the command to.
@param[in,out] Packet A pointer to the SD command data structure.
@param[in] Event If Event is NULL, blocking I/O is performed. If Event is
not NULL, then nonblocking I/O is performed, and Event
will be signaled when the Packet completes.
@retval EFI_SUCCESS The SD Command Packet was sent by the host.
@retval EFI_DEVICE_ERROR A device error occurred while attempting to send the SD
command Packet.
@retval EFI_INVALID_PARAMETER Packet, Slot, or the contents of the Packet is invalid.
@retval EFI_INVALID_PARAMETER Packet defines a data command but both InDataBuffer and
OutDataBuffer are NULL.
@retval EFI_NO_MEDIA SD Device not present in the Slot.
@retval EFI_UNSUPPORTED The command described by the SD Command Packet is not
supported by the host controller.
@retval EFI_BAD_BUFFER_SIZE The InTransferLength or OutTransferLength exceeds the
limit supported by SD card ( i.e. if the number of bytes
exceed the Last LBA).
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_MMC_PASS_THRU_PASSTHRU) (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN UINT8 Slot,
IN OUT EFI_SD_MMC_PASS_THRU_COMMAND_PACKET *Packet,
IN EFI_EVENT Event OPTIONAL
);
/**
Used to retrieve next slot numbers supported by the SD controller. The function
returns information about all available slots (populated or not-populated).
The GetNextSlot() function retrieves the next slot number on an SD controller.
If on input Slot is 0xFF, then the slot number of the first slot on the SD controller
is returned.
If Slot is a slot number that was returned on a previous call to GetNextSlot(), then
the slot number of the next slot on the SD controller is returned.
If Slot is not 0xFF and Slot was not returned on a previous call to GetNextSlot(),
EFI_INVALID_PARAMETER is returned.
If Slot is the slot number of the last slot on the SD controller, then EFI_NOT_FOUND
is returned.
@param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
@param[in,out] Slot On input, a pointer to a slot number on the SD controller.
On output, a pointer to the next slot number on the SD controller.
An input value of 0xFF retrieves the first slot number on the SD
controller.
@retval EFI_SUCCESS The next slot number on the SD controller was returned in Slot.
@retval EFI_NOT_FOUND There are no more slots on this SD controller.
@retval EFI_INVALID_PARAMETER Slot is not 0xFF and Slot was not returned on a previous call
to GetNextSlot().
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_MMC_PASS_THRU_GET_NEXT_SLOT) (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN OUT UINT8 *Slot
);
/**
Used to allocate and build a device path node for an SD card on the SD controller.
The BuildDevicePath() function allocates and builds a single device node for the SD
card specified by Slot.
If the SD card specified by Slot is not present on the SD controller, then EFI_NOT_FOUND
is returned.
If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned.
If there are not enough resources to allocate the device path node, then EFI_OUT_OF_RESOURCES
is returned.
Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of
DevicePath are initialized to describe the SD card specified by Slot, and EFI_SUCCESS is
returned.
@param[in] This A pointer to the EFI_SD_MMMC_PASS_THRU_PROTOCOL instance.
@param[in] Slot Specifies the slot number of the SD card for which a device
path node is to be allocated and built.
@param[in,out] DevicePath A pointer to a single device path node that describes the SD
card specified by Slot. This function is responsible for
allocating the buffer DevicePath with the boot service
AllocatePool(). It is the caller's responsibility to free
DevicePath when the caller is finished with DevicePath.
@retval EFI_SUCCESS The device path node that describes the SD card specified by
Slot was allocated and returned in DevicePath.
@retval EFI_NOT_FOUND The SD card specified by Slot does not exist on the SD controller.
@retval EFI_INVALID_PARAMETER DevicePath is NULL.
@retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_MMC_PASS_THRU_BUILD_DEVICE_PATH) (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN UINT8 Slot,
IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath
);
/**
This function retrieves an SD card slot number based on the input device path.
The GetSlotNumber() function retrieves slot number for the SD card specified by
the DevicePath node. If DevicePath is NULL, EFI_INVALID_PARAMETER is returned.
If DevicePath is not a device path node type that the SD Pass Thru driver supports,
EFI_UNSUPPORTED is returned.
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
@param[in] DevicePath A pointer to the device path node that describes a SD
card on the SD controller.
@param[out] Slot On return, points to the slot number of an SD card on
the SD controller.
@retval EFI_SUCCESS SD card slot number is returned in Slot.
@retval EFI_INVALID_PARAMETER Slot or DevicePath is NULL.
@retval EFI_UNSUPPORTED DevicePath is not a device path node type that the SD
Pass Thru driver supports.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_MMC_PASS_THRU_GET_SLOT_NUMBER) (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,
OUT UINT8 *Slot
);
/**
Resets an SD card that is connected to the SD controller.
The ResetDevice() function resets the SD card specified by Slot.
If this SD controller does not support a device reset operation, EFI_UNSUPPORTED is
returned.
If Slot is not in a valid slot number for this SD controller, EFI_INVALID_PARAMETER
is returned.
If the device reset operation is completed, EFI_SUCCESS is returned.
@param[in] This A pointer to the EFI_SD_MMC_PASS_THRU_PROTOCOL instance.
@param[in] Slot Specifies the slot number of the SD card to be reset.
@retval EFI_SUCCESS The SD card specified by Slot was reset.
@retval EFI_UNSUPPORTED The SD controller does not support a device reset operation.
@retval EFI_INVALID_PARAMETER Slot number is invalid.
@retval EFI_NO_MEDIA SD Device not present in the Slot.
@retval EFI_DEVICE_ERROR The reset command failed due to a device error
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SD_MMC_PASS_THRU_RESET_DEVICE) (
IN EFI_SD_MMC_PASS_THRU_PROTOCOL *This,
IN UINT8 Slot
);
struct _EFI_SD_MMC_PASS_THRU_PROTOCOL {
UINT32 IoAlign;
EFI_SD_MMC_PASS_THRU_PASSTHRU PassThru;
EFI_SD_MMC_PASS_THRU_GET_NEXT_SLOT GetNextSlot;
EFI_SD_MMC_PASS_THRU_BUILD_DEVICE_PATH BuildDevicePath;
EFI_SD_MMC_PASS_THRU_GET_SLOT_NUMBER GetSlotNumber;
EFI_SD_MMC_PASS_THRU_RESET_DEVICE ResetDevice;
};
extern EFI_GUID gEfiSdMmcPassThruProtocolGuid;
#endif