You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

603 lines
24 KiB

/** @file
Defines library APIs used by modules to save EFI Boot Script Opcodes.
These OpCode will be restored by S3 related modules.
Note that some of the API defined in the Library class may not
be provided in the Framework version library instance, which means some of these
APIs cannot be used if the underlying firmware is Framework and not PI.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions
of the BSD License which accompanies this distribution. The
full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _S3_BOOT_SCRIPT_LIB_H_
#define _S3_BOOT_SCRIPT_LIB_H_
#include <Library/BaseLib.h>
#include <IndustryStandard/SmBus.h>
/**
Macro that converts PCI Bus, PCI Device, PCI Function and PCI Register to an
address that can be passed to the S3 Boot Script Library PCI functions.
@param Bus PCI Bus number. Range 0..255.
@param Device PCI Device number. Range 0..31.
@param Function PCI Function number. Range 0..7.
@param Register PCI Register number. Range 0..255 for PCI. Range 0..4095
for PCI Express.
@return The encoded PCI address.
**/
#define S3_BOOT_SCRIPT_LIB_PCI_ADDRESS(Bus,Device,Function,Register) \
(UINT64) ( \
(((UINTN) Bus) << 24) | \
(((UINTN) Device) << 16) | \
(((UINTN) Function) << 8) | \
(((UINTN) (Register)) < 256 ? ((UINTN) (Register)) : (UINT64) (LShiftU64 ((UINT64) (Register), 32))))
///
/// S3 Boot Script Width.
///
typedef enum {
S3BootScriptWidthUint8, ///< 8-bit operation.
S3BootScriptWidthUint16, ///< 16-bit operation.
S3BootScriptWidthUint32, ///< 32-bit operation.
S3BootScriptWidthUint64, ///< 64-bit operation.
S3BootScriptWidthFifoUint8, ///< 8-bit FIFO operation.
S3BootScriptWidthFifoUint16, ///< 16-bit FIFO operation.
S3BootScriptWidthFifoUint32, ///< 32-bit FIFO operation.
S3BootScriptWidthFifoUint64, ///< 64-bit FIFO operation.
S3BootScriptWidthFillUint8, ///< 8-bit Fill operation.
S3BootScriptWidthFillUint16, ///< 16-bit Fill operation.
S3BootScriptWidthFillUint32, ///< 32-bit Fill operation.
S3BootScriptWidthFillUint64, ///< 64-bit Fill operation.
S3BootScriptWidthMaximum
} S3_BOOT_SCRIPT_LIB_WIDTH;
/**
Save I/O write to boot script.
@param[in] Width The width of the I/O operations.
@param[in] Address The base address of the I/O operations.
@param[in] Count The number of I/O operations to perform.
@param[in] Buffer The source buffer from which to write data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveIoWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
);
/**
Adds a record for an I/O modify operation into a S3 boot script table.
@param[in] Width The width of the I/O operations.
@param[in] Address The base address of the I/O operations.
@param[in] Data A pointer to the data to be OR-ed.
@param[in] DataMask A pointer to the data mask to be AND-ed with the data
read from the register.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveIoReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
);
/**
Adds a record for a memory write operation into a specified boot script table.
@param[in] Width The width of the I/O operations.
@param[in] Address The base address of the memory operations
@param[in] Count The number of memory operations to perform.
@param[in] Buffer The source buffer from which to write the data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveMemWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
);
/**
Adds a record for a memory modify operation into a specified boot script table.
@param[in] Width The width of the I/O operations.
@param[in] Address The base address of the memory operations. Address needs
alignment, if required
@param[in] Data A pointer to the data to be OR-ed.
@param[in] DataMask A pointer to the data mask to be AND-ed with the data
read from the register.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveMemReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
);
/**
Adds a record for a PCI configuration space write operation into a specified boot script table.
@param[in] Width The width of the I/O operations.
@param[in] Address The address within the PCI configuration space.
@param[in] Count The number of PCI operations to perform.
@param[in] Buffer The source buffer from which to write the data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfgWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
);
/**
Adds a record for a PCI configuration space modify operation into a specified boot script table.
@param[in] Width The width of the I/O operations.
@param[in] Address The address within the PCI configuration space.
@param[in] Data A pointer to the data to be OR-ed.The size depends on Width.
@param[in] DataMask A pointer to the data mask to be AND-ed.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN__SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfgReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
);
/**
Adds a record for a PCI configuration space modify operation into a specified boot script table.
@param[in] Width The width of the I/O operations.
@param[in] Segment The PCI segment number for Address.
@param[in] Address The address within the PCI configuration space.
@param[in] Count The number of PCI operations to perform.
@param[in] Buffer The source buffer from which to write the data.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfg2Write (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN UINTN Count,
IN VOID *Buffer
);
/**
Adds a record for a PCI configuration space modify operation into a specified boot script table.
@param[in] Width The width of the I/O operations.
@param[in] Segment The PCI segment number for Address.
@param[in] Address The address within the PCI configuration space.
@param[in] Data A pointer to the data to be OR-ed. The size depends on Width.
@param[in] DataMask A pointer to the data mask to be AND-ed.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciCfg2ReadWrite (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask
);
/**
Adds a record for an SMBus command execution into a specified boot script table.
@param[in] SmBusAddress Address that encodes the SMBUS Slave Address, SMBUS
Command, SMBUS Data Length, and PEC.
@param[in] Operation Indicates which particular SMBus protocol it will use
to execute the SMBus transactions.
@param[in] Length A pointer to signify the number of bytes that this
operation will do.
@param[in] Buffer Contains the value of data to execute to the SMBUS
slave device.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveSmbusExecute (
IN UINTN SmBusAddress,
IN EFI_SMBUS_OPERATION Operation,
IN UINTN *Length,
IN VOID *Buffer
);
/**
Adds a record for an execution stall on the processor into a specified boot script table.
@param[in] Duration The duration in microseconds of the stall.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveStall (
IN UINTN Duration
);
/**
Adds a record for dispatching specified arbitrary code into a specified boot script table.
@param[in] EntryPoint The entry point of the code to be dispatched.
@param[in] Context The argument to be passed into the EntryPoint of the code
to be dispatched.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveDispatch2 (
IN VOID *EntryPoint,
IN VOID *Context
);
/**
Adds a record for dispatching specified arbitrary code into a specified boot script table.
@param[in] EntryPoint The entry point of the code to be dispatched.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveDispatch (
IN VOID *EntryPoint
);
/**
Adds a record for memory reads of the memory location and continues when the exit
criteria is satisfied, or after a defined duration.
Please aware, below interface is different with PI specification, Vol 5:
EFI_S3_SAVE_STATE_PROTOCOL.Write() for EFI_BOOT_SCRIPT_MEM_POLL_OPCODE.
"Duration" below is microseconds, while "Delay" in PI specification means
the number of 100ns units to poll.
@param[in] Width The width of the memory operations.
@param[in] Address The base address of the memory operations.
@param[in] BitMask A pointer to the bit mask to be AND-ed with the data read
from the register.
@param[in] BitValue A pointer to the data value after to be Masked.
@param[in] Duration The duration in microseconds of the stall.
@param[in] LoopTimes The times of the register polling.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveMemPoll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *BitMask,
IN VOID *BitValue,
IN UINTN Duration,
IN UINT64 LoopTimes
);
/**
Store arbitrary information in the boot script table. This opcode is a no-op on
dispatch and is only used for debugging script issues.
@param[in] InformationLength Length of the data in bytes
@param[in] Information Information to be logged in the boot scrpit
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveInformation (
IN UINT32 InformationLength,
IN VOID *Information
);
/**
Adds a record for I/O reads the I/O location and continues when the exit criteria
is satisfied, or after a defined duration.
@param Width The width of the I/O operations.
@param Address The base address of the I/O operations.
@param Data The comparison value used for the polling exit criteria.
@param DataMask The mask used for the polling criteria. The bits in
the bytes below Width which are zero in Data are
ignored when polling the memory address.
@param Delay The number of 100ns units to poll. Note that timer
available may be of insufficient granularity, so the
delay may be longer.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform the
operation.
@retval RETURN_SUCCESS The opcode was added.
@note The FRAMEWORK version implementation does not support this API
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveIoPoll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask,
IN UINT64 Delay
);
/**
Adds a record for PCI configuration space reads and continues when the exit
criteria is satisfied ,or after a defined duration.
@param Width The width of the I/O operations.
@param Address The address within the PCI configuration space.
@param Data The comparison value used for the polling exit
criteria.
@param DataMask Mask used for the polling criteria. The bits in
the bytes below Width which are zero in Data are
ignored when polling the memory address.
@param Delay The number of 100ns units to poll. Note that timer
available may be of insufficient granularity, so the
delay may be longer.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform the
operation.
@retval RETURN_SUCCESS The opcode was added.
@note The FRAMEWORK version implementation does not support this API
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePciPoll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask,
IN UINT64 Delay
);
/**
Adds a record for PCI configuration space reads and continues when the exit criteria
is satisfied, or after a defined duration.
@param Width The width of the I/O operations.
@param Segment The PCI segment number for Address.
@param Address The address within the PCI configuration space.
@param Data The comparison value used for the polling exit
criteria.
@param DataMask Mask used for the polling criteria. The bits in
the bytes below Width which are zero
in Data are ignored when polling the memory address
@param Delay The number of 100ns units to poll. Note that timer
available may be of insufficient granularity so the delay
may be longer.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform the
operation.
@retval RETURN_SUCCESS The opcode was added.
@note A known Limitations in the implementation: When interpreting the opcode
EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE, EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE
and EFI_BOOT_SCRIPT_PCI_CONFIG2_POLL_OPCODE, the 'Segment' parameter is assumed as
Zero, or else, assert.
The FRAMEWORK version implementation does not support this API.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSavePci2Poll (
IN S3_BOOT_SCRIPT_LIB_WIDTH Width,
IN UINT16 Segment,
IN UINT64 Address,
IN VOID *Data,
IN VOID *DataMask,
IN UINT64 Delay
);
/**
Save ASCII string information specified by Buffer to boot script with opcode
EFI_BOOT_SCRIPT_INFORMATION_OPCODE.
@param[in] String The Null-terminated ASCII string to store into the S3 boot
script table.
@retval RETURN_OUT_OF_RESOURCES Not enough memory for the table to perform
the operation.
@retval RETURN_SUCCESS The opcode was added.
**/
RETURN_STATUS
EFIAPI
S3BootScriptSaveInformationAsciiString (
IN CONST CHAR8 *String
);
/**
This is an function to close the S3 boot script table. The function could only
be called in BOOT time phase. To comply with the Framework spec definition on
EFI_BOOT_SCRIPT_SAVE_PROTOCOL.CloseTable(), this function will fulfill following things:
1. Closes the specified boot script table
2. It allocates a new memory pool to duplicate all the boot scripts in the specified table.
Once this function is called, the table maintained by the library will be destroyed
after it is copied into the allocated pool.
3. Any attempts to add a script record after calling this function will cause a
new table to be created by the library.
4. The base address of the allocated pool will be returned in Address. Note that
after using the boot script table, the CALLER is responsible for freeing the
pool that is allocated by this function.
In Spec PI1.1, this EFI_BOOT_SCRIPT_SAVE_PROTOCOL.CloseTable() is retired. This
API is supplied here to meet the requirements of the Framework Spec.
If anyone does call CloseTable() on a real platform, then the caller is responsible
for figuring out how to get the script to run on an S3 resume because the boot script
maintained by the lib will be destroyed.
@return the base address of the new copy of the boot script table.
**/
UINT8*
EFIAPI
S3BootScriptCloseTable (
VOID
);
/**
Executes the S3 boot script table.
@retval RETURN_SUCCESS The boot script table was executed successfully.
@retval RETURN_UNSUPPORTED Invalid script table or opcode.
**/
RETURN_STATUS
EFIAPI
S3BootScriptExecute (
VOID
);
/**
Move the last boot script entry to the position
@param BeforeOrAfter Specifies whether the opcode is stored before
(TRUE) or after (FALSE) the positionin the boot
script table specified by Position. If Position
is NULL or points to NULL then the new opcode is
inserted at the beginning of the table (if TRUE)
or end of the table (if FALSE).
@param Position On entry, specifies the position in the boot script
table where the opcode will be inserted, either
before or after, depending on BeforeOrAfter. On
exit, specifies the position of the inserted opcode
in the boot script table.
@retval RETURN_OUT_OF_RESOURCES The table is not available.
@retval RETURN_INVALID_PARAMETER The Position is not a valid position in the
boot script table.
@retval RETURN_SUCCESS The opcode was inserted.
@note The FRAMEWORK version implementation does not support this API.
**/
RETURN_STATUS
EFIAPI
S3BootScriptMoveLastOpcode (
IN BOOLEAN BeforeOrAfter,
IN OUT VOID **Position OPTIONAL
);
/**
Find a label within the boot script table and, if not present, optionally create it.
@param BeforeOrAfter Specifies whether the opcode is stored before (TRUE)
or after (FALSE) the position in the boot script table
specified by Position.
@param CreateIfNotFound Specifies whether the label will be created if the
label does not exists (TRUE) or not (FALSE).
@param Position On entry, specifies the position in the boot script
table where the opcode will be inserted, either
before or after, depending on BeforeOrAfter. On exit,
specifies the positionof the inserted opcode in
the boot script table.
@param Label Points to the label which will be inserted in the
boot script table.
@retval EFI_SUCCESS The operation succeeded. A record was added into
the specified script table.
@retval EFI_INVALID_PARAMETER The parameter is illegal or the given boot script
is not supported. If the opcode is unknow or not
supported because of the PCD Feature Flags.
@retval EFI_OUT_OF_RESOURCES There is insufficient memory to store the boot script.
@note The FRAMEWORK version implementation does not support this API
**/
RETURN_STATUS
EFIAPI
S3BootScriptLabel (
IN BOOLEAN BeforeOrAfter,
IN BOOLEAN CreateIfNotFound,
IN OUT VOID **Position OPTIONAL,
IN CONST CHAR8 *Label
);
/**
Compare two positions in the boot script table and return their relative position.
@param Position1 The positions in the boot script table to compare
@param Position2 The positions in the boot script table to compare
@param RelativePosition On return, points to the result of the comparison
@retval EFI_SUCCESS The operation succeeded. A record was added into the
specified script table.
@retval EFI_INVALID_PARAMETER The parameter is illegal or the given boot script
is not supported. If the opcode is unknow or not s
upported because of the PCD Feature Flags.
@retval EFI_OUT_OF_RESOURCES There is insufficient memory to store the boot script.
@note The FRAMEWORK version implementation does not support this API
**/
RETURN_STATUS
EFIAPI
S3BootScriptCompare (
IN UINT8 *Position1,
IN UINT8 *Position2,
OUT UINTN *RelativePosition
);
#endif