You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

593 lines
25 KiB

/** @file
Implementation of SmBusLib class library for DXE phase.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include "InternalSmbusLib.h"
/**
Executes an SMBUS quick read command.
Executes an SMBUS quick read command on the SMBUS device specified by SmBusAddress.
Only the SMBUS slave address field of SmBusAddress is required.
If Status is not NULL, then the status of the executed command is returned in Status.
If PEC is set in SmBusAddress, then ASSERT().
If Command in SmBusAddress is not zero, then ASSERT().
If Length in SmBusAddress is not zero, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
SMBUS Command, SMBUS Data Length, and PEC.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_SUCCESS: The SMBUS command was executed.
RETURN_TIMEOUT: A timeout occurred while executing the
SMBUS command.
RETURN_DEVICE_ERROR: The request was not
completed because a failure reflected in the Host Status
Register bit. Device errors are a result of a transaction
collision, illegal command field, unclaimed cycle (host
initiated), or bus errors (collisions).
RETURN_UNSUPPORTED: The SMBus operation is not supported.
**/
VOID
EFIAPI
SmBusQuickRead (
IN UINTN SmBusAddress,
OUT RETURN_STATUS *Status OPTIONAL
)
{
ASSERT (!SMBUS_LIB_PEC (SmBusAddress));
ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
InternalSmBusExec (EfiSmbusQuickRead, SmBusAddress, 0, NULL, Status);
}
/**
Executes an SMBUS quick write command.
Executes an SMBUS quick write command on the SMBUS device specified by SmBusAddress.
Only the SMBUS slave address field of SmBusAddress is required.
If Status is not NULL, then the status of the executed command is returned in Status.
If PEC is set in SmBusAddress, then ASSERT().
If Command in SmBusAddress is not zero, then ASSERT().
If Length in SmBusAddress is not zero, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
SMBUS Command, SMBUS Data Length, and PEC.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_SUCCESS: The SMBUS command was executed.
RETURN_TIMEOUT: A timeout occurred while executing the
SMBUS command.
RETURN_DEVICE_ERROR: The request was not completed because
a failure reflected in the Host Status Register bit.
Device errors are a result of a transaction collision,
illegal command field, unclaimed cycle (host initiated),
or bus errors (collisions).
RETURN_UNSUPPORTED: The SMBus operation is not supported.
**/
VOID
EFIAPI
SmBusQuickWrite (
IN UINTN SmBusAddress,
OUT RETURN_STATUS *Status OPTIONAL
)
{
ASSERT (!SMBUS_LIB_PEC (SmBusAddress));
ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
InternalSmBusExec (EfiSmbusQuickWrite, SmBusAddress, 0, NULL, Status);
}
/**
Executes an SMBUS receive byte command.
Executes an SMBUS receive byte command on the SMBUS device specified by SmBusAddress.
Only the SMBUS slave address field of SmBusAddress is required.
The byte received from the SMBUS is returned.
If Status is not NULL, then the status of the executed command is returned in Status.
If Command in SmBusAddress is not zero, then ASSERT().
If Length in SmBusAddress is not zero, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
SMBUS Command, SMBUS Data Length, and PEC.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_SUCCESS: The SMBUS command was executed.
RETURN_TIMEOUT: A timeout occurred while executing the
SMBUS command.
RETURN_DEVICE_ERROR: The request was not completed because
a failure reflected in the Host Status Register bit. Device
errors are a result of a transaction collision, illegal
command field, unclaimed cycle(host initiated), or bus
errors (collisions).
RETURN_CRC_ERROR: The checksum is not correct. (PEC is incorrect.)
RETURN_UNSUPPORTED: The SMBus operation is not supported.
@return The byte received from the SMBUS.
**/
UINT8
EFIAPI
SmBusReceiveByte (
IN UINTN SmBusAddress,
OUT RETURN_STATUS *Status OPTIONAL
)
{
UINT8 Byte;
ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
InternalSmBusExec (EfiSmbusReceiveByte, SmBusAddress, 1, &Byte, Status);
return Byte;
}
/**
Executes an SMBUS send byte command.
Executes an SMBUS send byte command on the SMBUS device specified by SmBusAddress.
The byte specified by Value is sent.
Only the SMBUS slave address field of SmBusAddress is required. Value is returned.
If Status is not NULL, then the status of the executed command is returned in Status.
If Command in SmBusAddress is not zero, then ASSERT().
If Length in SmBusAddress is not zero, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
SMBUS Command, SMBUS Data Length, and PEC.
@param Value The 8-bit value to send.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_SUCCESS: The SMBUS command was executed.
RETURN_TIMEOUT: A timeout occurred while executing the
SMBUS command.
RETURN_DEVICE_ERROR: The request was not completed because
a failure reflected in the Host Status Register bit. Device
errors are a result of a transaction collision, illegal
command field, unclaimed cycle(host initiated), or bus
errors (collisions).
RETURN_CRC_ERROR: The checksum is not correct (PEC is incorrect)
RETURN_UNSUPPORTED: The SMBus operation is not supported.
@return The parameter of Value.
**/
UINT8
EFIAPI
SmBusSendByte (
IN UINTN SmBusAddress,
IN UINT8 Value,
OUT RETURN_STATUS *Status OPTIONAL
)
{
UINT8 Byte;
ASSERT (SMBUS_LIB_COMMAND (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
Byte = Value;
InternalSmBusExec (EfiSmbusSendByte, SmBusAddress, 1, &Byte, Status);
return Value;
}
/**
Executes an SMBUS read data byte command.
Executes an SMBUS read data byte command on the SMBUS device specified by SmBusAddress.
Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
The 8-bit value read from the SMBUS is returned.
If Status is not NULL, then the status of the executed command is returned in Status.
If Length in SmBusAddress is not zero, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
SMBUS Command, SMBUS Data Length, and PEC.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_SUCCESS: The SMBUS command was executed.
RETURN_TIMEOUT: A timeout occurred while executing the
SMBUS command.
RETURN_DEVICE_ERROR: The request was not completed because
a failurereflected in the Host Status Register bit. Device
errors are a result of a transaction collision, illegal
command field, unclaimed cycle (host initiated), or bus
errors (collisions).
RETURN_CRC_ERROR: The checksum is not correct (PEC is incorrect)
RETURN_UNSUPPORTED: The SMBus operation is not supported.
@return The byte read from the SMBUS.
**/
UINT8
EFIAPI
SmBusReadDataByte (
IN UINTN SmBusAddress,
OUT RETURN_STATUS *Status OPTIONAL
)
{
UINT8 Byte;
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
InternalSmBusExec (EfiSmbusReadByte, SmBusAddress, 1, &Byte, Status);
return Byte;
}
/**
Executes an SMBUS write data byte command.
Executes an SMBUS write data byte command on the SMBUS device specified by SmBusAddress.
The 8-bit value specified by Value is written.
Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
Value is returned.
If Status is not NULL, then the status of the executed command is returned in Status.
If Length in SmBusAddress is not zero, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
SMBUS Command, SMBUS Data Length, and PEC.
@param Value The 8-bit value to write.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_SUCCESS: The SMBUS command was executed.
RETURN_TIMEOUT: A timeout occurred while executing the
SMBUS command.
RETURN_DEVICE_ERROR: The request was not completed because
a failure reflected in the Host Status Register bit. Device
errors are a result of a transaction collision, illegal
command field, unclaimed cycle host initiated), or bus
errors (collisions).
RETURN_CRC_ERROR: The checksum is not correct. (PEC is incorrect.)
RETURN_UNSUPPORTED: The SMBus operation is not supported.
@return The parameter of Value.
**/
UINT8
EFIAPI
SmBusWriteDataByte (
IN UINTN SmBusAddress,
IN UINT8 Value,
OUT RETURN_STATUS *Status OPTIONAL
)
{
UINT8 Byte;
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
Byte = Value;
InternalSmBusExec (EfiSmbusWriteByte, SmBusAddress, 1, &Byte, Status);
return Value;
}
/**
Executes an SMBUS read data word command.
Executes an SMBUS read data word command on the SMBUS device specified by SmBusAddress.
Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
The 16-bit value read from the SMBUS is returned.
If Status is not NULL, then the status of the executed command is returned in Status.
If Length in SmBusAddress is not zero, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
SMBUS Command, SMBUS Data Length, and PEC.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_SUCCESS: The SMBUS command was executed.
RETURN_TIMEOUT: A timeout occurred while executing the
SMBUS command.
RETURN_DEVICE_ERROR: The request was not completed because
a failure reflected in the Host Status Register bit.
Device errors are a result of a transaction collision,
illegal command field, unclaimed cycle (host initiated),
or bus errors (collisions).
RETURN_CRC_ERROR: The checksum is not correct. (PEC is
incorrect.)
RETURN_UNSUPPORTED: The SMBus operation is not supported.
@return The byte read from the SMBUS.
**/
UINT16
EFIAPI
SmBusReadDataWord (
IN UINTN SmBusAddress,
OUT RETURN_STATUS *Status OPTIONAL
)
{
UINT16 Word;
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
InternalSmBusExec (EfiSmbusReadWord, SmBusAddress, 2, &Word, Status);
return Word;
}
/**
Executes an SMBUS write data word command.
Executes an SMBUS write data word command on the SMBUS device specified by SmBusAddress.
The 16-bit value specified by Value is written.
Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
Value is returned.
If Status is not NULL, then the status of the executed command is returned in Status.
If Length in SmBusAddress is not zero, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
SMBUS Command, SMBUS Data Length, and PEC.
@param Value The 16-bit value to write.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_SUCCESS: The SMBUS command was executed.
RETURN_TIMEOUT: A timeout occurred while executing the SMBUS
command.
RETURN_DEVICE_ERROR: The request was not completed because
a failure reflected in the Host Status Register bit.
Device errors are a result of a transaction collision,
illegal command field, unclaimed cycle (host initiated),
or bus errors (collisions).
RETURN_CRC_ERROR: The checksum is not correct.
(PEC is incorrect.)
RETURN_UNSUPPORTED: The SMBus operation is not supported.
@return The parameter of Value.
**/
UINT16
EFIAPI
SmBusWriteDataWord (
IN UINTN SmBusAddress,
IN UINT16 Value,
OUT RETURN_STATUS *Status OPTIONAL
)
{
UINT16 Word;
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
Word = Value;
InternalSmBusExec (EfiSmbusWriteWord, SmBusAddress, 2, &Word, Status);
return Value;
}
/**
Executes an SMBUS process call command.
Executes an SMBUS process call command on the SMBUS device specified by SmBusAddress.
The 16-bit value specified by Value is written.
Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
The 16-bit value returned by the process call command is returned.
If Status is not NULL, then the status of the executed command is returned in Status.
If Length in SmBusAddress is not zero, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
SMBUS Command, SMBUS Data Length, and PEC.
@param Value The 16-bit value to write.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_SUCCESS: The SMBUS command was executed.
RETURN_TIMEOUT: A timeout occurred while executing the
SMBUS command.
RETURN_DEVICE_ERROR: The request was not completed because
a failure reflected in the Host Status Register bit.
Device errors are a result of a transaction collision,
illegal command field, unclaimed cycle (host initiated),
or bus errors (collisions).
RETURN_CRC_ERROR: The checksum is not correct. (PEC is
incorrect.)
RETURN_UNSUPPORTED: The SMBus operation is not supported.
@return The 16-bit value returned by the process call command.
**/
UINT16
EFIAPI
SmBusProcessCall (
IN UINTN SmBusAddress,
IN UINT16 Value,
OUT RETURN_STATUS *Status OPTIONAL
)
{
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
InternalSmBusExec (EfiSmbusProcessCall, SmBusAddress, 2, &Value, Status);
return Value;
}
/**
Executes an SMBUS read block command.
Executes an SMBUS read block command on the SMBUS device specified by SmBusAddress.
Only the SMBUS slave address and SMBUS command fields of SmBusAddress are required.
Bytes are read from the SMBUS and stored in Buffer.
The number of bytes read is returned, and will never return a value larger than 32-bytes.
If Status is not NULL, then the status of the executed command is returned in Status.
It is the caller's responsibility to make sure Buffer is large enough for the total number of bytes read.
SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes.
If Length in SmBusAddress is not zero, then ASSERT().
If Buffer is NULL, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
SMBUS Command, SMBUS Data Length, and PEC.
@param Buffer The pointer to the buffer to store the bytes read from
the SMBUS.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_SUCCESS: The SMBUS command was executed.
RETURN_TIMEOUT: A timeout occurred while executing the SMBUS
command.
RETURN_DEVICE_ERROR: The request was not completed because
a failure reflected in the Host Status Register bit. Device
errors are a result of a transaction collision, illegal
command field, unclaimed cycle (host initiated), or bus
errors (collisions).
RETURN_CRC_ERROR: The checksum is not correct. (PEC is
incorrect.)
RETURN_UNSUPPORTED: The SMBus operation is not supported.
@return The number of bytes read.
**/
UINTN
EFIAPI
SmBusReadBlock (
IN UINTN SmBusAddress,
OUT VOID *Buffer,
OUT RETURN_STATUS *Status OPTIONAL
)
{
ASSERT (Buffer != NULL);
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) == 0);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
return InternalSmBusExec (EfiSmbusReadBlock, SmBusAddress, 0x20, Buffer, Status);
}
/**
Executes an SMBUS write block command.
Executes an SMBUS write block command on the SMBUS device specified by SmBusAddress.
The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required.
Bytes are written to the SMBUS from Buffer.
The number of bytes written is returned, and will never return a value larger than 32-bytes.
If Status is not NULL, then the status of the executed command is returned in Status.
If Length in SmBusAddress is zero or greater than 32, then ASSERT().
If Buffer is NULL, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
MBUS Command, SMBUS Data Length, and PEC.
@param Buffer The pointer to the buffer to store the bytes read from
the SMBUS.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_TIMEOUT: A timeout occurred while executing the
SMBUS command.
RETURN_DEVICE_ERROR: The request was not completed because
a failure reflected in the Host Status Register bit. Device
errors are a result of a transaction collision, illegal
command field, unclaimed cycle (host initiated), or bus
errors (collisions).
RETURN_CRC_ERROR: The checksum is not correct. (PEC is
incorrect.)
RETURN_UNSUPPORTED: The SMBus operation is not supported.
@return The number of bytes written.
**/
UINTN
EFIAPI
SmBusWriteBlock (
IN UINTN SmBusAddress,
OUT VOID *Buffer,
OUT RETURN_STATUS *Status OPTIONAL
)
{
UINTN Length;
ASSERT (Buffer != NULL);
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) >= 1);
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) <= 32);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
Length = SMBUS_LIB_LENGTH (SmBusAddress);
return InternalSmBusExec (EfiSmbusWriteBlock, SmBusAddress, Length, Buffer, Status);
}
/**
Executes an SMBUS block process call command.
Executes an SMBUS block process call command on the SMBUS device specified by SmBusAddress.
The SMBUS slave address, SMBUS command, and SMBUS length fields of SmBusAddress are required.
Bytes are written to the SMBUS from WriteBuffer. Bytes are then read from the SMBUS into ReadBuffer.
If Status is not NULL, then the status of the executed command is returned in Status.
It is the caller's responsibility to make sure ReadBuffer is large enough for the total number of bytes read.
SMBUS supports a maximum transfer size of 32 bytes, so Buffer does not need to be any larger than 32 bytes.
If Length in SmBusAddress is zero or greater than 32, then ASSERT().
If WriteBuffer is NULL, then ASSERT().
If ReadBuffer is NULL, then ASSERT().
If any reserved bits of SmBusAddress are set, then ASSERT().
@param SmBusAddress The address that encodes the SMBUS Slave Address,
SMBUS Command, SMBUS Data Length, and PEC.
@param WriteBuffer The pointer to the buffer of bytes to write to the SMBUS.
@param ReadBuffer The pointer to the buffer of bytes to read from the SMBUS.
@param Status Return status for the executed command.
This is an optional parameter and may be NULL.
RETURN_TIMEOUT: A timeout occurred while executing the
SMBUS command.
RETURN_DEVICE_ERROR: The request was not completed because
a failure reflected in the Host Status Register bit. Device
errors are a result of a transaction collision, illegal
command field, unclaimed cycle (host initiated), or bus
errors (collisions).
RETURN_CRC_ERROR: The checksum is not correct. (PEC is
incorrect.)
RETURN_UNSUPPORTED: The SMBus operation is not supported.
@return The number of bytes written.
**/
UINTN
EFIAPI
SmBusBlockProcessCall (
IN UINTN SmBusAddress,
IN VOID *WriteBuffer,
OUT VOID *ReadBuffer,
OUT RETURN_STATUS *Status OPTIONAL
)
{
UINTN Length;
ASSERT (WriteBuffer != NULL);
ASSERT (ReadBuffer != NULL);
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) >= 1);
ASSERT (SMBUS_LIB_LENGTH (SmBusAddress) <= 32);
ASSERT (SMBUS_LIB_RESERVED (SmBusAddress) == 0);
Length = SMBUS_LIB_LENGTH (SmBusAddress);
//
// Assuming that ReadBuffer is large enough to save another memory copy.
//
ReadBuffer = CopyMem (ReadBuffer, WriteBuffer, Length);
return InternalSmBusExec (EfiSmbusBWBRProcessCall, SmBusAddress, Length, ReadBuffer, Status);
}