You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

437 lines
11 KiB

/** @file
Module to clarify the element info of the smbios structure.
Copyright (c) 2005 - 2015, Intel Corporation. All rights reserved.<BR>
(C) Copyright 2017 Hewlett Packard Enterprise Development LP<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#ifndef _SMBIOS_PRINT_INFO_H_
#define _SMBIOS_PRINT_INFO_H_
#include <IndustryStandard/SmBios.h>
extern UINT8 SmbiosMajorVersion;
extern UINT8 SmbiosMinorVersion;
#define SHOW_NONE 0x00
#define SHOW_OUTLINE 0x01
#define SHOW_NORMAL 0x02
#define SHOW_DETAIL 0x03
//
// SHOW_ALL: WaitEnter() not wait input.
//
#define SHOW_ALL 0x04
#define SHOW_STATISTICS 0x05
#define AS_UINT16(pData) (*((UINT16 *) pData))
#define AS_UINT32(pData) (*((UINT32 *) pData))
#define AS_UINT64(pData) (*((UINT64 *) pData))
/**
Print the info of EPS(Entry Point Structure).
@param[in] SmbiosTable Pointer to the SMBIOS table entry point.
@param[in] Option Display option.
**/
VOID
SmbiosPrintEPSInfo (
IN SMBIOS_TABLE_ENTRY_POINT *SmbiosTable,
IN UINT8 Option
);
/**
Print the info of 64-bit EPS(Entry Point Structure).
@param[in] SmbiosTable Pointer to the SMBIOS table entry point.
@param[in] Option Display option.
**/
VOID
Smbios64BitPrintEPSInfo (
IN SMBIOS_TABLE_3_0_ENTRY_POINT *SmbiosTable,
IN UINT8 Option
);
/**
This function print the content of the structure pointed by Struct.
@param[in] Struct Point to the structure to be printed.
@param[in] Option Print option of information detail.
@retval EFI_SUCCESS Successfully Printing this function.
@retval EFI_INVALID_PARAMETER Invalid Structure.
@retval EFI_UNSUPPORTED Unsupported.
**/
EFI_STATUS
SmbiosPrintStructure (
IN SMBIOS_STRUCTURE_POINTER *Struct,
IN UINT8 Option
);
/**
Display BIOS Information (Type 0) information.
@param[in] Chara The information bits.
@param[in] Option The optional information.
**/
VOID
DisplayBiosCharacteristics (
IN UINT64 Chara,
IN UINT8 Option
);
/**
Display Bios Characteristice extensions1 information.
@param[in] Byte1 The information.
@param[in] Option The optional information.
**/
VOID
DisplayBiosCharacteristicsExt1 (
IN UINT8 Byte1,
IN UINT8 Option
);
/**
Display Bios Characteristice extensions2 information.
@param[in] Byte2 The information.
@param[in] Option The optional information.
**/
VOID
DisplayBiosCharacteristicsExt2 (
IN UINT8 Byte2,
IN UINT8 Option
);
/**
Display Processor Information (Type 4) information.
@param[in] Family The family value.
@param[in] Option The option value.
**/
VOID
DisplayProcessorFamily (
UINT8 Family,
UINT8 Option
);
/**
Display processor family information.
@param[in] Family2 The family value.
@param[in] Option The option value.
**/
VOID
DisplayProcessorFamily2 (
IN UINT16 Family2,
IN UINT8 Option
);
/**
Display processor voltage information.
@param[in] Voltage The Voltage.
Bit 7 Set to 0, indicating 'legacy' mode for processor voltage
Bits 6:4 Reserved, must be zero
Bits 3:0 Voltage Capability.
A Set bit indicates that the voltage is supported.
Bit 0 - 5V
Bit 1 - 3.3V
Bit 2 - 2.9V
Bit 3 - Reserved, must be zero.
Note:
Setting of multiple bits indicates the socket is configurable
If bit 7 is set to 1, the remaining seven bits of the field are set to
contain the processor's current voltage times 10.
For example, the field value for a processor voltage of 1.8 volts would be
92h = 80h + (1.8 * 10) = 80h + 18 = 80h +12h.
@param[in] Option The option.
**/
VOID
DisplayProcessorVoltage (
IN UINT8 Voltage,
IN UINT8 Option
);
/**
Display processor information.
@param[in] Status The status.
Bit 7 Reserved, must be 0
Bit 6 CPU Socket Populated
1 - CPU Socket Populated
0 - CPU Socket Unpopulated
Bits 5:3 Reserved, must be zero
Bits 2:0 CPU Status
0h - Unknown
1h - CPU Enabled
2h - CPU Disabled by User via BIOS Setup
3h - CPU Disabled By BIOS (POST Error)
4h - CPU is Idle, waiting to be enabled.
5-6h - Reserved
7h - Other
@param[in] Option The option
**/
VOID
DisplayProcessorStatus (
IN UINT8 Status,
IN UINT8 Option
);
/**
Display information about Memory Controller Information (Type 5).
@param[in] Size Memory size.
@param[in] SlotNum Which slot is this about.
@param[in] Option Option for the level of detail output required.
**/
VOID
DisplayMaxMemoryModuleSize (
IN UINT8 Size,
IN UINT8 SlotNum,
IN UINT8 Option
);
/**
Display information about memory configuration handles.
@param[in] Handles The buffer of handles to output info on.
@param[in] SlotNum The number of handles in the above buffer.
@param[in] Option Option for the level of detail output required.
**/
VOID
DisplayMemoryModuleConfigHandles (
IN UINT16 *Handles,
IN UINT8 SlotNum,
IN UINT8 Option
);
/**
Display Memory Module Information (Type 6).
@param[in] BankConnections
@param[in] Option
**/
VOID
DisplayMmBankConnections (
IN UINT8 BankConnections,
IN UINT8 Option
);
/**
Display memory informcation.
Bits 0:6 Size (n),
where 2**n is the size in MB with three special-case values:
7Dh Not determinable (Installed Size only)
7Eh Module is installed, but no memory has been enabled
7Fh Not installed
Bit 7 Defines whether the memory module has a single- (0)
or double-bank (1) connection.
@param[in] Size - The size
@param[in] Option - The option
**/
VOID
DisplayMmMemorySize (
IN UINT8 Size,
IN UINT8 Option
);
/**
Display Cache Configuration.
@param[in] CacheConfiguration Cache Configuration.
Bits 15:10 Reserved, must be 0
Bits 9:8 Operational Mode
0h - Write Through
1h - Write Back
2h - Varies with Memory Address
3h - Unknown
Bit 7 Enabled/Disabled
1 - Enabled
0 - Disabled
Bits 6:5 Location
0h - Internal
1h - External
2h - Reserved
3h - Unknown
Bit 4 Reserved, must be zero
Bit 3 Cache Socketed
1 - Socketed
0 - Unsocketed
Bits 2:0 Cache Level
1 through 8 (For example, an L1 cache would
use value 000b and an L3 cache would use 010b.)
@param[in] Option The option
**/
VOID
DisplayCacheConfiguration (
IN UINT16 CacheConfiguration,
IN UINT8 Option
);
/**
The Slot ID field of the System Slot structure provides a mechanism to
correlate the physical attributes of the slot to its logical access method
(which varies based on the Slot Type field).
@param[in] SlotId - The slot ID
@param[in] SlotType - The slot type
@param[in] Option - The Option
**/
VOID
DisplaySystemSlotId (
IN UINT16 SlotId,
IN UINT8 SlotType,
IN UINT8 Option
);
/**
Display Portable Battery (Type 22) information.
The date the cell pack was manufactured, in packed format:
Bits 15:9 Year, biased by 1980, in the range 0 to 127.
Bits 8:5 Month, in the range 1 to 12.
Bits 4:0 Date, in the range 1 to 31.
For example, 01 February 2000 would be identified as
0010 1000 0100 0001b (0x2841).
@param[in] Date The date
@param[in] Option The option
**/
VOID
DisplaySBDSManufactureDate (
IN UINT16 Date,
IN UINT8 Option
);
/**
Display System Reset (Type 23) information.
Routine Description:
Identifies the system-reset capabilities for the system.
Bits 7:6 Reserved for future assignment via this specification, set to 00b.
Bit 5 System contains a watchdog timer, either True (1) or False (0).
Bits 4:3 Boot Option on Limit.
Identifies the system action to be taken when the Reset Limit is reached, one of:
00b Reserved, do not use.
01b Operating system
10b System utilities
11b Do not rebootBits
2:1 Boot Option. Indicates the action to be taken following a watchdog reset, one of:
00b Reserved, do not use.
01b Operating system
10b System utilities
11b Do not reboot
Bit 0 Status.
1b The system reset is enabled by the user
0b The system reset is not enabled by the user
@param[in] Reset Reset
@param[in] Option The option
**/
VOID
DisplaySystemResetCapabilities (
IN UINT8 Reset,
IN UINT8 Option
);
/**
Display Hardware Security (Type 24) information.
Routine Description:
Identifies the password and reset status for the system:
Bits 7:6 Power-on Password Status, one of:
00b Disabled
01b Enabled
10b Not Implemented
11b Unknown
Bits 5:4 Keyboard Password Status, one of:
00b Disabled
01b Enabled
10b Not Implemented
11b Unknown
Bits 3:2 Administrator Password Status, one of:
00b Disabled
01b Enabled
10b Not Implemented
11b Unknown
Bits 1:0 Front Panel Reset Status, one of:
00b Disabled
01b Enabled
10b Not Implemented
11b Unknown
@param[in] Settings The device settings.
@param[in] Option The device options.
**/
VOID
DisplayHardwareSecuritySettings (
IN UINT8 Settings,
IN UINT8 Option
);
/**
Display Out-of-Band Remote Access (Type 30) information.
@param[in] Connections The device characteristics.
@param[in] Option The device options.
**/
VOID
DisplayOBRAConnections (
IN UINT8 Connections,
IN UINT8 Option
);
/**
Display System Boot Information (Type 32) information.
@param[in] Parameter The parameter.
@param[in] Option The options.
**/
VOID
DisplaySystemBootStatus (
IN UINT8 Parameter,
IN UINT8 Option
);
/**
Display System Power Supply (Type 39) information.
@param[in] Characteristics The device characteristics.
@param[in] Option The device options.
**/
VOID
DisplaySPSCharacteristics (
IN UINT16 Characteristics,
IN UINT8 Option
);
/**
Display TPM Device (Type 43) Characteristics.
@param[in] Chara The information bits.
@param[in] Option The optional information.
**/
VOID
DisplayTpmDeviceCharacteristics (
IN UINT64 Chara,
IN UINT8 Option
);
#endif