You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Theodosius/README.md

142 lines
8.6 KiB

4 years ago
<div align="center">
<div>
4 years ago
<img width="27%" src="https://githacks.org/_xeroxz/theodosius/-/raw/07b58a233c0fbd289856c90158fe342fc4be4deb/imgs/theo.jpg"/>
4 years ago
</div>
</div>
4 years ago
# Theodosius - Jit linker, Mapper, Mutator, and Obfuscator
4 years ago
4 years ago
Theodosius (Theo for short) is a jit linker created entirely for obfuscation and mutation of both code, and code flow. The project is extremely modular in design and supports
4 years ago
both kernel and usermode projects. Since Theo inherits HMDM (highly modular driver mapper), any vulnerable driver that exposes arbitrary MSR writes, or physical memory read/write can be used with this framework to map unsigned code into the kernel. This is possible since HMDM inherits VDM (vulnerable driver manipulation), and MSREXEC (elevation of arbitrary MSR writes to kernel execution).
4 years ago
4 years ago
Since Theo is a jit linker, unexported symbols can be jit linked. Resolving such symbols is open ended and allows the programmer of this framework to handle how they want to resolve symbols. More on this later (check out example projects).
4 years ago
# RIP Relative Addressing
In order to allow for a routine to be scattered throughout a 64bit address space, RIP relative addressing must not be used. In order to facilitate this, a very special version
of clang-cl is used which can use `mcmodel=large`. This will generate instructions which do not use RIP relative addressing when referencing symbols outside of the routine in which the
instruction itself resides. The only exception to this is JCC instructions, (besides call) also known as branching instructions. Take this c++ code for an example:
```cpp
ObfuscateRoutine
extern "C" int ModuleEntry()
{
MessageBoxA(0, "Demo", "Hello From Obfuscated Routine!", 0);
UsermodeMutateDemo();
UsermodeNoObfuscation();
}
```
This c++ function, compiled by clang-cl with `mcmodel=large`, will generate a routine with the following instructions:
4 years ago
```
4 years ago
0x00: ; void UsermodeNoObfuscation(void)
0x00: public ?UsermodeNoObfuscation@@YAXXZ
0x00: ?UsermodeNoObfuscation@@YAXXZ proc near ; CODE XREF: ModuleEntry+42↓p
0x00: var_4 = dword ptr -4
0x00: 48 83 EC 28 sub rsp, 28h
0x04: C7 44 24 24 00 00 00 00 mov [rsp+28h+var_4], 0
0x0C: loc_C:
0x0C: 83 7C 24 24 05 cmp [rsp+28h+var_4], 5
0x11: 0F 83 38 00 00 00 jnb loc_4F
0x17: 31 C0 xor eax, eax
0x19: 48 BA 28 01 00 00 00 00 00 00 mov rdx, offset ??_C@_04DKDMNOEB@Demo?$AA@ ; "Demo"
0x23: 49 B8 00 01 00 00 00 00 00 00 mov r8, offset ??_C@_0CD@JEJKPGNA@Hello?5... ; "Hello From Non-Obfuscated Routine!"
0x2D: 48 B8 A0 01 00 00 00 00 00 00 mov rax, offset MessageBoxA
0x37: 45 31 C9 xor r9d, r9d ; uType
0x3A: 44 89 C9 mov ecx, r9d ; hWnd
0x3D: FF D0 call rax ; MessageBoxA
0x3F: 8B 44 24 24 mov eax, [rsp+28h+var_4]
0x43: 83 C0 01 add eax, 1
0x46: 89 44 24 24 mov [rsp+28h+var_4], eax
0x4A: E9 BD FF FF FF jmp loc_C
0x4F: loc_4F:
0x4F: 48 83 C4 28 add rsp, 28h
0x53: C3 retn
0x53: ?UsermodeNoObfuscation@@YAXXZ endp
```
4 years ago
As you can see from the code above, (sorry for the terrible syntax highlighting), references to strings and calls to functions are done by first loading the address of the symbol into a register and then interfacing with the symbol.
4 years ago
4 years ago
```
4 years ago
0x2D: 48 B8 A0 01 00 00 00 00 00 00 mov rax, offset MessageBoxA
; ...
0x3D: FF D0 call rax ; MessageBoxA
```
4 years ago
4 years ago
Each of these instructions can be anywhere in virtual memory and it would not effect code execution one bit. However this is not the case with routines which have conditional branches. Take the following c++ code for example.
4 years ago
```cpp
4 years ago
ObfuscateRoutine
void LoopDemo()
4 years ago
{
4 years ago
for (auto idx = 0u; idx < 10; ++idx)
DbgPrint("> Loop Demo: %d\n", idx);
}
```
4 years ago
4 years ago
This c++ function, compiled by clang-cl with `mcmodel=large`, will generate a routine with the following instructions:
4 years ago
```
4 years ago
0x58 ; void LoopDemo(void)
0x58 public ?LoopDemo@@YAXXZ
0x58 ?LoopDemo@@YAXXZ proc near
0x58 var_4 = dword ptr -4
0x58
0x58 48 83 EC 28 sub rsp, 28h
0x5C C7 44 24 24 00 00 00 00 mov [rsp+28h+var_4], 0
0x64 loc_64:
0x64 83 7C 24 24 0A cmp [rsp+28h+var_4], 0Ah
0x69 0F 83 2A 00 00 00 jnb loc_99
0x6F 8B 54 24 24 mov edx, [rsp+28h+var_4]
0x73 48 B9 60 01 00 00 00 00 00 00 mov rcx, offset ??_C@_0BB@HGKDPLMC@?$.... ; "> Loop Demo: %d\n"
0x7D 48 B8 38 02 00 00 00 00 00 00 mov rax, offset DbgPrint
0x87 FF D0 call rax ; DbgPrint
0x89 8B 44 24 24 mov eax, [rsp+28h+var_4]
0x8D 83 C0 01 add eax, 1
0x90 89 44 24 24 mov [rsp+28h+var_4], eax
0x94 E9 CB FF FF FF jmp loc_64
0x99 loc_99:
0x99 48 83 C4 28 add rsp, 28h
0x9D C3 retn
0x9D ?LoopDemo@@YAXXZ endp
4 years ago
```
4 years ago
Uh oh, `jnb loc_99`?, thats RIP relative! In order to handle branching operations, a "jump table" is generated by `obfuscation::obfuscate` explicit default constructor. Instead of branching to the RIP relative code, it will instead branch to an inline jump (`JMP [RIP+0x0]`). As demonstrated below, the branching operation is altered to branch to an asbolute jump.
```
ffff998b`c5369e60 0f830e000000 jnb ffff998b`c5369e74
ffff998b`c5369e66 ff2500000000 jmp qword ptr [ffff998b`c5369e6c]
...
ffff998b`c5369e74 ff2500000000 jmp qword ptr [ffff998b`c5369e7a]
```
The linker is able to get the address of the branching code by taking the rip relative virtual address of the branching operation, which is a signed number, and adding it to the current byte offset into the current routine, plus the size of the branching instruction. For example `LoopDemo@17` + size of the branching instruction, which is six bytes, then adding the signed relative virtual address (0x2A). The result of this simple calculation gives us `LoopDemo@65`, which is correct, the branch goes to `add rsp, 28h` in the above example.
4 years ago
4 years ago
# Obfuscation
4 years ago
4 years ago
The usage of the word obfuscation in this project is use to define any changes made to code, this includes code flow. `obfuscation::obfuscate`, a base class, which is inherited and expanded upon by `obfuscation::mutation`, obfuscates code flow by inserting `JMP [RIP+0x0]` instructions after every single instruction. This allows for a routine to be broken up into unique allocations of memory and thus provides more canvas room for creative ideas.
4 years ago
4 years ago
### Obfuscation - Base Class
4 years ago
4 years ago
The base class, as described in the above section, contains a handful of util routines and a single explicit constructor which is the corner stone of the class. The constructor fixes JCC relative virtual addresses so that if the condition is met, instead of jumping instruction pointer relativitly, it will jump to an addition jmp (`JMP [RIP+0x0]`).
LEA's, nor CALL's are rip relative, even for symbols defined inside of the routine in which the instruction is compiled into. In other words JCC instructions are the only instruction pointer relative instructions that are generated.
4 years ago
### Mutation - Inherts Obfuscation
4 years ago
4 years ago
This class inherits from `obfuscate` and adds additional code, or "mutation". This class is a small example of how to use inheritance with `obfuscate` base class. It generates a stack push/pop palindrome. The state of the stack is restored before the routines actual instruction is executed. The assembly will now look like this in memory:
```
push gp
push gp
push gp
...
pop gp
pop gp
pop gp
exec routine instruction
jmp next instruction
```